Security Metal Detection
 
Languages
 
Skip Navigation Links.
 
CEIA is an ISO 9001 Company certified
SMD 601 Multi Zone
The Most Advanced Multi-Zone Metal Detector for Law Enforcement and Correctional Facilities
  • Very High Sensitivity to magnetic and non-magnetic metals and to stainless steel
  • Complies with new Standard NIJ-0601.02
  • Quick, accurate analysis of all parts of the body of people in transit
  • Very accurate pinpointing of individual and multiple metal masses
  • Extremely high level of immunity to electrical and mechanical interference
  • Local or Remote Programming with Networking Capabilities

Small Object size (small hard-to-find items)

Medium Object size (Knives)

Large Object size (Handguns) 		The CEIA SMD601TM is a Multi-Zone Walk-Through Metal Detector specifically designed to comply with the new NIJ Standard-0601.02 (U.S. Dep. of Justice). The Standard establishes new requirements of Sensitivity, Discrimination and Immunity for Law Enforcement and Correctional Facilities.

This is an extremely sensitive device for the detection of conventional weapons, such as pistols and knives, as well as small, hard-to-find items, normally difficult to detect, that could be considered a threat to officer and prisoner safety.

The three levels of Security specified by the Standard (Large, Medium and Small object size) are pre-loaded in the Metal Detector, and can be selected directly by the user via a simple operation at the control unit.

A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of the need for manual searches. The Anti-Vandalism Control Unit (IP65 in stainless steel) is incorporated into the structure of the Metal Detector. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.
Download
Brochures
Manuals
Certificates
Declaration of Conformity CEConformity to Human Exposure Standards
AutoCAD block
Main features
  • Immediate selection (parameter IS) of Security Levels specified by NIJ Standard-0601.02.
  • Additional Threat Levels selectable by Chip-Card.
  • Detection of magnetic, non-magnetic and mixed alloys metal weapons.
  • All functions programmable and controlled by a microprocessor.
  • Photocell transit counter and automatic alarm rate calculation.
  • Programming: via built-in keypad and display or RS-232 serial connection to Remote Control Unit (RCU2), a PC or a computer network.
  • Programming access protected by both a mechanical lock and by two alphanumeric passwords.
  • High speed of detection: up to 15 meters per second.
  • Very high immunity to electromagnetic and mechanical interference.
  • Automatic synchronization between two or more Metal Detectors, at a distance of down to 20 cm, from each other, without using cables.
  • Professional high integration and high reliability electronics.
  • Control unit incorporated into the detector.
  • No initial or periodic calibration.
  • Easy maintenance: modular control unit for a rapid replacement.
  • Colour: light grey RAL 7040.
Installation Data
  • Power Supply: 115 / 230 VAC, ±15%, 50 ... 60 Hz, 40 VA max.
  • External interface: RS-232C for connection to a Remote Control Unit (RCU2), a terminal, a computer, an external modem or other CEIA Metal Detectors
  • Operating temperature: from -20°C to +70°C.
  • Relative humidity: from 0 to 95% (without condensation).
Certification and Conformity
  • Compliant with the Human Exposure Safety Requirements specifi ed by NIJ Standard-0601.02.
  • Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC).
Alarms
  • Visible signals
    • Multi-zone display bar for “height on person” localization.
    • High intensity display.
    • Green and red metering signals proportional to the mass of the object detected.
  • Audible signals
    • High acoustic intensity alarm signal.
    • Volume and tone of alarm signal can be programmed.
Options Click on a photo to enlarge
APSIM - Connection module with Anti-tamper on/off switch and Ethernet interface
Accessories Click on a photo to enlarge
Chip cards - For automatic calibration of Security Levels and parameters settingKit FGA & TFV - Functionality test and adjustment of gain at ground level
Kit OFV - Operator-level functionality testMBSU-2 - Main & Battery Supply Unit
MD Scope - Software for oscilloscope simulation and terminal operation on CEIA Metal DetectorsMDNC-1 - Ethernet network interface for CEIA Metal Detectors
Personal Effects DepositoryRCU2 - Remote Control Unit
RRU - Remote Relay Unit
CEIA SpA
Costruzioni Elettroniche
Industriali Automatismi

Zona Industriale Viciomaggio
52041 Arezzo - Italy

Tel. +39 0575 4181
Fax +39 0575 418298

infosecurity@ceia-spa.com

VAT number IT00308150515
CEIA USA West Coast Office
Mr. Alen Tucker

Tel. +1 916 436 1205
Tel. +1 440 991 6842
Fax +1 503 665 1951

atucker@ceia-usa.com