CEIA Security Metal Detectors

Languages

SAMD
Shoe Analyzer
	Conforms to the detection requirements of EU Reg. N°1862/2006 Conforms to the provisions of EU Reg. N°857/2005 for Airport Security Automatic Detection of Weapons hidden in the shoes and simultaneous discrimination of the metal components of the shoes Increase in Passenger Flow Rate Reduction up to 10 times the number of shoes that must be examined manually
Installation recommended	The dramatic events of 11th September 2001 caused the Airport Security Authorities to strengthen checks on passengers and their personal effects. Notwithstanding the extremely high discrimination capability of last-generation CEIA walk-through Metal Detectors, a certain percentage of shoes containing significant metal masses still cause alarms during transit, and so have to be examined by security staff with another inspection system – usually the X-ray scanner – to ensure that there are no meal weapons hidden in them. This obviously causes inconvenience to the passengers in transit. In the light of this new operational scenario, CEIA has developed the SAMD Shoe Analyzer to check shoes worn by passengers without having to remove them, employing low-frequency electromagnetic fields which are non-ionizing and completely harmless. The SAMD Shoe Analyzer, which complies with the most recent, stringent security requirements, reduces by up to 10 times or more the number of shoes that must be examined manually.

Download

Brochure

Manuals

Certificates

AutoCAD block

Special Features

Professional high-integration, optimum reliability electronics
D.S.P. analysis with numeric filter of the signal received
High immunity demodulation of the signals
Exceptional discrimination
Immediately-available display of security level
Chip card system for direct selection of the operating mode, according to International Security Standards or customer requirements. The use of the card may be protected by password
Programmability of all the parameters protected by passwords
Very reduced analysis time for a rapid flow-rate (2 seconds)
Automatic synchronisation between 2 or more devices with a reciprocal distance of down to 1 m without the use of cables
Capacity for total remote control through an RS-232C serial line
Automatic adjustment to environmental parameters and absence of initial or periodic calibrations.
Proper environmental installation checked by means of a read-out of the general noise “GN” and electromagnetic noise “EN”.
Complete interchangeability of electronics units and antennae thanks to the repeatability of the manufacturing processes
Functionality tests can be carried out using accessory kit

Central Electronics Unit

Installation Data

Power supply: 115/230V ˜ ±15%, , 50 … 60 Hz, 30 VA
Serial interface: RS-232C type with low impedance for connection to terminal, computer or external modem at a distance of up to 100 m
Working temperature: -20 to +70°C
Storage temperature: -35 to +70°C
Relative humidity: 0 to 95%, without condensation
Designed and built using advanced technological criteria, the probe is extremely robust and stable, yet elegant and fully protected against the effects of weather and wear-and-tear
Total weight: 60 kg

Signalling

Display of use instructions
Detection of metallic masses
Sabotage or internal self-diagnosis
Visual: fixed or proportionate to the mass in transit - visible from 6m under lighting of 4000lux.
Audio: programmable up to 90 dB(A) at 1m

Certification and Conformity

Certified as harmless to wearers of pacemakers, invalids, pregnant women and so forth.
Harmless to magnetic media
Conforms to the detection requirements of EU Reg. N°1862/2006
Conforms to the provisions of EU Reg N°857/2005 for Airport Security
Conforms to the international standards currently applicable for electrical safety and EMC, and to the applicable EC Regulations.
Conforms to all Airport Security Standards worldwide

Options Click on a photo to enlarge
APSIM - Connection module with Anti-tamper on/off switch and Ethernet interface

Accessories Click on a photo to enlarge
Chip cards - For automatic calibration of Security Levels and parameters setting		Kit OFV - Operator-level functionality test
MBSU-2 - Main & Battery Supply Unit		MD Scope - Software for oscilloscope simulation and terminal operation on CEIA Metal Detectors
MDNC-1 - Ethernet network interface for CEIA Metal Detectors