Security Metal Detection
 
Languages
 
Skip Navigation Links.
 
CEIA is an ISO 9001 Company certified
PMD2
Very High Performance Multi-Zone Metal Detector
  • Uniform Detection Field
  • Very High Discrimination
  • Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit
  • Fast Programming through an Exclusive Chip Card System
  • High Immunity to External Interferences
  • Local or Remote Programming with Networking Capabilities

Chip card system: automatic calibration of security standards 		PMD2, acronym for Programmable Metal Detector, is the most advanced CEIA application with an international patent of its own. It generates an electromagnetic scanning field for the detection of metallic weapons inside a monitored passage. Thanks to this technology, the PMD2 Metal Detector allows weapons to be accurately located on people in transit, considerably speeding up search operations.

A “height on person“ display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. The location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution.

Use of the PMD2 ensures an extremely high level of discrimination of metal personal effects.

PMD2 can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a power failure.

PMD2 is available in panel (PMD2/PTZ) or column (PMD2/ENZ) version. Also an outdoor column version, PMD2/EWZ, is offered with an IP65 degree of protection.

A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector. The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The PMD2 is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.
Download
Brochures
Manuals
Certificates
Declaration of Conformity CEConformity to Human Exposure Standards
AutoCAD block
Main features
  • Detection of firearms in magnetic and non-magnetic metals and mixed alloys.
  • High transit flow-rate thanks to the discrimination of metal personal effects.
  • Direct selection of International Security Standards.
  • Programmable operation controlled by microprocessor.
  • Programming using incorporated keypad and display or via RS-232 serial connection by Remote Control Unit (RCU2), personal computer or computer network.
  • Access to programming protected by mechanical lock.
  • High detection speed: up to 15 m/s.
  • High immunity to mechanical and electromagnetic interference.
Installation Data
  • Power Supply: 115 / 230 VAC, ±15%, 50 ... 60 Hz, 30 VA max.
  • External interface: RS-232C for connection to a Remote Control Unit (RCU2), a terminal, a computer, an external modem or other CEIA Metal Detectors
  • Operating temperature: from -20°C to +70°C
  • Relative humidity: from 0 to 95% (without condensation).
Certification and Conformity
  • Complies with Regulations relating to pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar).
  • Conforms to the current International Security Standards for Walk-Through Metal Detectors.
  • Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC).
Alarms
  • Visible signals
    • Multi-zone display bar for “height on person” localization.
    • High intensity display.
    • Green and red metering signals proportional to the mass of the object detected.
  • Audible signals
    • High acoustic intensity alarm signal.
    • Volume and tone of alarm signal can be programmed.
Options Click on a photo to enlarge
Transit count by photocells and automatic calculation of the flow-rateOutdoor version, waterproof degree IP65
Emergency batteriesAPSIM - Connection module with Anti-tamper on/off switch and Ethernet interface
Accessories Click on a photo to enlarge
Chip cards - For automatic calibration of Security Levels and parameters settingMBSU-2 - Main & Battery Supply Unit
MD Scope - Software for oscilloscope simulation and terminal operation on CEIA Metal DetectorsMDNC-1 - Ethernet network interface for CEIA Metal Detectors
Personal Effects DepositoryRCU2 - Remote Control Unit
RRU - Remote Relay Unit
Application pictures Click on a photo to enlarge
CEIA SpA
Costruzioni Elettroniche
Industriali Automatismi

Zona Industriale Viciomaggio
52041 Arezzo - Italy

Tel. +39 0575 4181
Fax +39 0575 418298

infosecurity@ceia-spa.com

VAT number IT00308150515
CEIA USA West Coast Office
Mr. Alen Tucker

Tel. +1 916 436 1205
Tel. +1 440 991 6842
Fax +1 503 665 1951

atucker@ceia-usa.com