| Main characteristics |
- Very high sensitivity for detection of small metal objects normally difficult to detect.
- Very high immunity to mechanical and electromagnetic interference.
- Control unit incorporated in the structure of the Metal Detector in anti-vandalism version (IP65 in stainless steel).
- Direct selection of International Security Standards.
- Programmable operation controlled by microprocessor.
- Programming using incorporated keypad and display or via RS-232 serial connection by Remote Control Unit (RCU2), personal computer or computer network.
- Access to programming protected by mechanical lock.
- High detection speed: up to 15 m/s.
- Automatic synchronization of two or more Metal Detectors at a reciprocal distance down to 5 cm without using cables.
- Professional high-integration, highly reliable electronics.
- No initial or periodic calibration.
- Easy maintenance: modular electronic control unit for easy replacement.
- Light grey colour RAL 7040.
|
| Installation Data |
- Power Supply: 115 / 230 VAC, ±15%, 50 ... 60 Hz, 30 VA max.
- External interface: RS-232C for connection to a Remote Control Unit (RCU2), a terminal, a computer, an external modem or other CEIA Metal Detectors
- Operating temperature: from -20°C to +70°C
- Relative humidity: from 0 to 95% (without condensation).
|
| Certification and Conformity |
- Complies with Regulations relating to pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar).
- Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC).
|
| Alarms |
- Visible signals
- Multi-zone display bar for “height on person” localization.
- High intensity display.
- Green and red metering signals proportional to the mass of the object detected.
- Audible signals
- High acoustic intensity alarm signal.
- Volume and tone of alarm signal can be programmed.
|
